|1. If you are using a set of our powered speakers you cannot connect them to a powered amplifier as this will cause damage to the speaker’s internal amplifier. We do have non-powered speaker models that can be connected to a power amplifier, or directly to the amplified outputs of a receiver.
2. There are two ways to use our powered speakers with a receiver:
If the receiver has a Line output, or a pre-amp output, you can connect the speakers to these outputs, as they are sending a pre-amplified signal, and not an amplified signal. *Always check with the owner’s manual, or the product manufacturer to make sure this is a pre-amp output before connecting.