- Total activity 50
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 24
ArticlesRecent activity by Fab
Wifi Speaker Troubleshooting (MS50A)
App and Firmware Update Before troubleshooting, make sure you are running the latest firmware on each of the speakers, and you have the latest version of the Edifier Home app. For instructions on...
Wifi Speaker FAQ (MS50A)
Is it easy to connect a MS50A speakers to a TV? It is possible to connect an Edifier Wifi Speaker to a TV, if the TV has Bluetooth connectivity and supports Bluetooth speaker output. However, with ...
No sound from the computer when connected to USB
For Speakers equipped with USB XMOS Hi-Res input: 1. Please check that the USB input is selected on the speaker. USB will be displayed on the control speakers input screen.2. For Mac users, please...
Do I need to install drivers for USB input?
For Mac OS X version 10.6.4 and above. No driver is required. For windows 7/10, a driver may be required for the speakers to function properly. You can download the driver below.
My speakers are no longer turning on/not playing any audio?
1. Are the speakers plugged into a working outlet and the master power switch on the active speaker is switched to on? Can you try the speakers with a few different outlets? Is the LED indicator on...
Connecting a subwoofer with a pair of powered speakers that do not have a “Sub-Out”
This is only possible with analog input i.e. AUX input. You can use a subwoofer with our powered speakers, but the subwoofer must also be self-powered. You will need an RCA Y-splitter. From the aud...
Using our self-powered speakers with a power amplifier or receiver.
All Edifier and Airpulse speakers are self-powered, with the only exception of the P-series such as P12 and P17. 1. If you are using a set of our powered speakers you cannot connect them to a power...
Speakers connected to TV using the optical cable, but am not getting any sound.
1. Check that the optical input is selected on the speakers, for speakers with an LED indicator the light will be red, for speakers with a screen, OPT will be displayed. 2. Our speakers use Pulse-...
Speakers are connected to my turntable, but there is little or no volume.
Self-powered speakers require a Pre-amp to boost the phono signal to a line-level. Many modern turntables come with a built-in switchable pre-amp. Usually the switch to turn on the pre-amp is eithe...
I cannot control volume over Bluetooth on a PC running Windows 10
Disable the absolute volume function on the computer by following these steps. 1. Open Windows Registry (search for regedit.exe).2. Click on Computer>HKEY_LOCAL_MACHINE>SYSTEM>ControlSet001>Control...